Electrical Panel Upgrades & Replacement in Temple, TX
Licensed electrical panel installation, upgrades, and replacement for homes and businesses across Central Texas. Permits handled. Work done to code. Call for a quote.
Electrical Panel Services — Temple, TX & Central Texas
MEP Electric handles the full scope of electrical panel work for homes and businesses throughout Central Texas. From a simple breaker box repair to a full 200 amp panel upgrade — permitted, inspected, and done to code.
Electrical Panel Upgrade
Upgrading from 100 amp to 200 amp service to support modern electrical loads — EV chargers, pools, hot tubs, welders, space heaters, wall-mounted AC units, and other high-demand equipment. Includes permit, inspection, and circuit labeling.
Electrical Panel Replacement
Full replacement of outdated, damaged, or unsafe electrical panels. We remove the old panel, install a new main breaker panel, transfer all circuits, and handle the permit and inspection from start to finish.
200 Amp Panel Upgrade
A 200 amp electrical panel is common in new construction and often the right choice for modern homes. If you are still on 100 amp service, a 200 amp upgrade can give your home additional capacity to handle today's electrical demands safely and reliably.
Federal Pacific Panel Replacement
Federal Pacific and Zinsco panels are known fire and safety hazards. MEP Electric removes and replaces these panels throughout Central Texas. If your home has a Federal Pacific breaker box, call us today.
Electrical Panel Repair
Tripping breakers, burnt wiring, loose connections, and failing components diagnosed and repaired by a licensed electrician. We find the problem fast and fix it right — no guesswork, no shortcuts.
Sub-Panel Installation
Adding a workshop, garage, pool, or outdoor living space? A dedicated sub-panel keeps your main panel from being overloaded and gives new construction areas their own clean circuit distribution.
Breakers Tripping? Panel Running Hot?
Call today to get a panel quote. We serve all of Central Texas within 60 miles of Temple.
Signs You Need an Electrical Panel Upgrade or Replacement
Your electrical panel is the control center of your home. When it starts to fail, the signs are hard to miss — and the risks are serious. Learn more about when to replace an electrical panel and the warning signs Central Texas homeowners should watch for.
Breakers That Trip Repeatedly
Repeatedly tripping breakers are one of the most common panel problems MEP Electric is called about. Frequent trips can point to an overloaded circuit, a failing breaker, or a panel that no longer has enough capacity for the home.
Flickering or Dimming Lights
Lights that flicker or dim when appliances start up can indicate your panel is struggling with the load. This can be more common in homes with older 100 amp service.
Burning Smell or Heat Near the Panel
Any burning smell, buzzing, crackling, or heat coming from your electrical panel is a safety issue. Don't open or touch the panel. If there's smoke or any sign of fire, leave the area and call emergency services first, then call a licensed electrician.
Federal Pacific or Zinsco Panel
MEP Electric still encounters Federal Pacific and Zinsco panels frequently in Central Texas. These older panels have known safety concerns and should be evaluated by a licensed electrician to determine whether replacement is recommended.
Adding an EV Charger, Pool, Hot Tub, or High-Demand Equipment
EV chargers, pools, hot tubs, welders, space heaters, wall-mounted AC units, and home additions can place significant new demand on an electrical system. MEP Electric can calculate the load and determine whether your existing panel has enough capacity or needs an upgrade.
Rust, Corrosion, or Visible Damage
Rust and corrosion inside your panel box indicate moisture infiltration — a serious electrical hazard. Damaged or improperly labeled breakers also need immediate attention.
Not Sure If Your Panel Needs Work?
MEP Electric comes to your property, assesses the panel on-site, and tells you exactly what it needs and what it costs — before any work begins.
Call 254-277-0021Electrical Panel Upgrade — Start to Finish
Every panel replacement follows a clear process. MEP Electric evaluates the existing system, handles applicable permitting, completes the installation, and coordinates required inspections.
On-Site Quote
We assess your current panel, calculate load requirements, and recommend the right panel size. You get an itemized quote before any work begins.
Permits & Scheduling
Where permits and inspections are required, MEP Electric handles the permitting process, coordinates inspection scheduling, and sets the installation date. Requirements vary by location.
Panel Installation
Our licensed electricians remove the old panel, install the new main breaker box, transfer the circuits, and label everything clearly. Installation time varies based on the existing system, the scope of the upgrade, and any additional electrical work required.
Inspection & Sign-Off
Where an inspection is required, MEP Electric coordinates it with the appropriate local authority and walks you through the completed panel and the work performed.
Electrical Panel Upgrades & Replacement — What You Need to Know
Key information for Central Texas homeowners and businesses about electrical panel upgrades, replacements, and the cost to replace an electrical panel. For general maintenance advice and answers to common panel questions, see our electrical panel tips and guides.
Electrical Panel Upgrade — Temple, TX
An electrical panel upgrade replaces your existing breaker box with a higher-capacity unit to meet modern power demands. Many older Central Texas homes are still on 100 amp service, which may not provide enough capacity for today's HVAC systems, EV chargers, and high-demand appliances. MEP Electric performs electrical panel upgrades throughout Temple, Belton, Killeen, Salado, Waco, and the surrounding area. Every upgrade includes permit handling, inspection coordination, and full circuit labeling.
Cost to Replace an Electrical Panel in Temple, TX
A typical electrical panel replacement or upgrade to 200 amp service in the Temple, TX area runs about $3,000–$3,500 based on MEP Electric’s current ballpark pricing. The final price depends on the existing panel, wiring condition, service requirements, permit needs, and whether utility coordination or additional electrical work is required. If the existing panel has no room for new circuits, adding a subpanel typically adds around $1,500 to the project. Call MEP Electric at 254-277-0021 to schedule an on-site assessment and receive an exact quote.
200 Amp Panel Upgrade — Central Texas
A 200 amp panel upgrade can provide additional capacity for modern electrical demands such as Level 2 EV chargers, pools, hot tubs, welders, space heaters, wall-mounted AC units, and other high-demand equipment. MEP Electric evaluates the existing service and load requirements before recommending an upgrade. We install 200 amp panels throughout Temple, Belton, Killeen, Harker Heights, and the surrounding area, with required permits and inspections handled as part of the project.
Federal Pacific Electrical Panel Replacement
Federal Pacific Electric panels — also called Stab-Lok panels — have a well-documented history of breaker failure, overheating, and house fires. If your home in Central Texas has a Federal Pacific panel or a Zinsco panel, it should be replaced. MEP Electric performs Federal Pacific panel replacements throughout Temple, Belton, Killeen, and surrounding communities. Do not wait for a problem — call us to schedule an on-site assessment.
Electrical Panel Repair — Temple, TX
Not every panel issue requires full replacement. MEP Electric diagnoses and repairs individual breaker failures, loose connections, corroded bus bars, and wiring issues in existing panels. Electrical panel repair in Temple, TX starts with a full diagnostic — we identify the problem, explain the repair, and give you a clear price before any work begins. Call 254-277-0021 to schedule a panel diagnostic.
Sub-Panel Installation — Central Texas
A sub-panel brings dedicated electrical service to a detached garage, workshop, pool, backyard structure, or home addition without overloading the main panel. MEP Electric installs sub-panels for residential and commercial properties throughout Central Texas. Sub-panel installation includes load calculation, breaker sizing, conduit routing, and a dedicated disconnect — all permitted and inspected to code.
Electrical Panel FAQs — Temple, TX
Common questions from Central Texas homeowners about electrical panel upgrades, replacements, and repair.
How much does an electrical panel upgrade cost in Temple, TX?
A typical electrical panel replacement or 200 amp upgrade in the Temple, TX area runs about $3,000–$3,500 based on MEP Electric’s current ballpark pricing. Final cost depends on the existing panel, wiring condition, service requirements, permits, utility coordination, and any additional electrical work. Call 254-277-0021 for an on-site quote.
When do I need an electrical panel replacement?
Signs include frequently tripping breakers, flickering lights, burning smells near the panel, rust or corrosion, an older Federal Pacific or Zinsco panel, or insufficient capacity for new loads such as EV chargers, pools, hot tubs, welders, space heaters, wall-mounted AC units, or home additions. See our electrical panel tips for a closer look at each of these warning signs.
Do I need a permit for a panel upgrade in Temple, TX?
It depends on where the home is. Inside city limits, including Temple, a permit and inspection are generally required, though enforcement varies by area. Unincorporated Bell County typically does not require one. MEP Electric handles permitting wherever it applies as part of every panel installation.
What is a 200 amp panel upgrade?
A 200 amp upgrade replaces older 100 amp service with a 200 amp main breaker panel, which is common in newer homes. It can provide additional capacity for EV chargers, large HVAC systems, and other modern electrical demands.
Does MEP Electric replace Federal Pacific panels?
Yes. Federal Pacific and Zinsco panels are known safety hazards. MEP Electric removes and replaces them throughout Temple, Belton, Killeen, and all of Central Texas. Call 254-277-0021 to schedule an on-site assessment.
How long does a panel replacement take?
The time required for an electrical panel replacement varies based on the existing electrical system, the scope of the upgrade, permitting requirements, utility coordination, and inspection scheduling. MEP Electric reviews the project and explains the expected timeline before work begins.
Electrical Panel Upgrades Near Me — Central Texas
MEP Electric is based in Temple, TX and serves a 60-mile radius for all electrical panel work. Bell County, McLennan County, Williamson County, Coryell County, and surrounding areas.
Serving Bell, McLennan, Williamson, Coryell, Falls, and Hill counties. Call to confirm coverage for your location.
Questions About Your Electrical Panel?
Talk to a licensed electrician today. Serving all of Central Texas.
Call for an Electrical Panel Quote
Licensed electricians serving Temple, Belton, Killeen, Salado, Waco, and all of Central Texas. Veteran-owned. Permit handling included. Call to schedule your on-site quote.